Circuits
Kinetics
CSTR Design
Ethics
Growth
100

What is the formula for Ohm's Law?

V = IR

100

What is the general formula for a first-order reaction rate?

r = −kCr

100

What does CSTR stand for?

Continuous Stirred Tank Reactor

100

What does AIChE stand for?

American Institute of Chemical Engineers

100

What is the lag phase in cell growth?

The period when cells adapt to their environment before starting to divide.

200

If a circuit has a voltage of 10 V and a resistance of 5 Ω, what is the current? 

2 A

200

If the initial concentration is 2 mol/L and decreases to 1 mol/L in 10 minutes, what is the rate constant for a first-order reaction?

k= 0.069min^−1

200

Name one advantage of a CSTR over a batch reactor.

Steady-state operation and ease of temperature control

200

Name one principle of the AIChE Code of Ethics.

Hold paramount the safety, health, and welfare of the public.

200

Write the equation for exponential growth of cells.

N=N_0e^μt

300

Calculate the equivalent resistance of three 10 Ω resistors connected in series. 

30 Ω

300

or a batch reactor, calculate the time required for a second-order reaction to reach 50% conversion if k=0.5 L/mol\cdotpmink = 0.5 \, \text{L}/\text{mol·min}k=0.5L/mol\cdotpmin and initial concentration is 1 mol/L.

2 minutes

300

Derive the steady-state mole balance equation for a CSTR.

F_A0 - F_A + r_A V = 0

300

Provide an example of how an engineer might breach the AIChE Code of Ethics in a workplace setting.

Ignoring a known safety hazard to meet a project deadline.

300

Define the specific growth rate (μ\muμ

The rate at which cells multiply during exponential growth.

400

Calculate the total resistance of a circuit with two 8 Ω resistors in parallel and a 4 Ω resistor in a series

8 Ω

400

Derive the integrated rate law for a zero-order reaction in a batch reactor.

C = C_0−kt

400

Calculate the required reactor volume for a CSTR operating at 90% conversion with a flow rate of 1 L/min and a reaction rate constant of 0.1 L/mol\cdotpmin\text{L}/\text{mol·min}L/mol\cdotpmin. Assume first-order reaction kinetics.

V=90L

400

What are the potential consequences for a chemical engineer who violates ethical guidelines in a professional setting?

Loss of credibility, legal repercussions, or harm to the public.

400

If the specific growth rate is 0.2 hr−10.2 \, \text{hr}^{-1}0.2hr−1, how many cells will be present after 5 hours if the initial cell count is 1×1061 \times 10^61×106?

N=1×106e0.2×5≈2.7×106

500

Design a circuit with a total resistance of 10 Ω using only 4 Ω and 6 Ω resistors. Show your setup.

Connect two 4 Ω resistors in parallel, resulting in 2 Ω, then add the 6 Ω resistor in series.

500

A reaction follows second-order kinetics, and the concentration of AAA decreases from 0.8 mol/L to 0.2 mol/L in 15 minutes. Calculate kkk.

k=0.25L/mol\cdotpmin)

500

Compare the performance of a CSTR and a plug-flow reactor (PFR) for identical reaction conditions. Which would result in a higher conversion for a first-order reaction, and why?  

PFR, because concentration decreases along the length of the reactor, allowing more reaction to occur

500

ou are designing a chemical plant with a limited budget. How would you ensure safety and sustainability without compromising ethical principles?

Prioritize compliance with safety codes, conduct thorough risk assessments, and explore cost-effective but reliable solutions.

500

Explain why substrate concentration affects cell growth during the stationary phase.

Substrate limitation slows growth due to nutrient depletion.

M
e
n
u