Intro to Publications/NAMP
A term that indicates futurity
Will
Purpose: to establish an effective, aggressive, and continuous accident prevention program.
Naval Aviation Safety Program
Offset screwdriver
The Structural Hardware Manual
NA 01-1A-8
Cotter pins are used with which type of nut?
Castlellated nuts
..... has the final disposition authority on any changes to the NAMP.
COMNAVAIRFOR
.... will require that persons are instructed and drilled in all safety precautions and procedure, which they are complied with, and that applicable safety precautions are posted.
The Commanding Officer
Tool used where the space for handle swing is limited
Box end wrench
To assemble structural parts.
Structural Bolts
A scale that has horizontal index line with a value of twenty-five thousandth (0.025) of an inch per vertical line.
Sleeve Scale
Issued in a message for to expedite the dissemination of urgent operation and maintenance change information.
Interim Rapid Action Change (IRAC)
The establishment of a low impedance path between two metal surfaces.
Bonding
Duckbill Pliers
To provide a means of loading a bolted assembly to a desired level
Aircraft Nuts
Length of torque wrench from the center of the drive to the center of the handle grip.
Perpendicular distance
It indicates if the activity has the ability to repair an item, the level of repair capability, and the work center that performs the repair.
Individual Component Repair List (ICRL)
Have a flash point below 100F and give a vapor pressure not exceeding 40psig at 100F
Flammable Liquids
.... is responsible for implementing and promoting the Tool Control Program.
Maintenance/Material Control Officer
two complete threads
The most positive and satisfactory method of securing bolts, nuts, turnbuckles, etc.
Lockwire/Safety Wire
Definition: Publications and other forms of documentation which contains instructions for the use and maintenance of weapons, weapon system, components and equipment.
Technical Manual
Safety Data Sheet
State the 5 steps for reporting a Missing Tool Report.
1. Notify Maintenance Control and W/C Supervisor
2. Conduct a thorough search
3. If tool is not found, initiate Missing Tool Report
4. Maintenance Control notifies MO and QA
5. A/C will be in "down" status, MO initiates investigation conducted by QA
Fastens panels to high stress areas of the aircraft to allow for quick and easy access to the interior of the aircraft.
Camloc high-stress fasteners
State the difference between the two styles of wiring
Double twist: Used on all types of hardware when strength is required to keep the item secured.
Single Wire: Used on small, closely spaced items and on items that are in hard-to-reach areas