Machine parts
allows machine to turn 360 degrees
Turret
what does FPT stand for
Feed per tooth
What is the most common two types of material of milling cutters.
HSS and Carbide
what are the two types of jaws on a vise called
solid and moveable
process of adjusting the head of the spindle perpendicular to the table
tramming
allows the head to move back and forth
What is the formula for IPM
IPM= FPT x N x RPM
What decides the shape of the chip on a carbide insert
chipformer
a device that holds parts so they can be held vertically or horizontally in a vise
collect block
used to accurately establish a reference edge
edge finder
passes through the spindle and provides a means for securing tools in the spindle
drawbar
12.033
how is a slitting saw held in a milling machine spindle
stub arbor
workholding device that uses air suction to hold parts in place
vacuum plates
used to hold a boring bar
boring head
set to limit quill travel
micrometer adjusting nut
46.448
what is the flat part on the shank of an endmill called
weldon flat
highly secure fastening system for unique shaped parts
fixture
for proper chip breaking, the depth of cut should be 2/3 of the ___________
tool nose radius
used when an emergency requires the spindle to be stopped immediately
spindle brake
104.58
woodruff keyseat cutter
glue-base that cures when exposed to ultraviolet light
adhesive-based workholding
two types of peripheral milling
conventional and climb milling