What is the maximum batch size for destruction?
100
What does RTD stand for?
Rack-level
Tamper
Detection
True or False: You must verify the rack asset and host asset you're working on before beginning to remove drives
True
What (logical) tool do you use to console into a switch?
PuTTY
What does PPE stand for?
Protective
Equipment
What (logical) tool is used for destruction?
Mobility
How long can a RTD be suppressed for?
90 minutes
When you scan serial numbers, what is Boost checking for in the back-end database?
The list of serial numbers & the quantity of drives
What does rPDU stand for?
Rack
Power
Distribution
Unit
What is the minimum ANSI cut level required for gloves?
ANSI 105 Level A2
What is the minimum batch size for destruction?
There is no minimum
What is a "Cable Out of Bounds" alarm?
When the reported length of tether has been made shorter or longer than original recorded value
After you have removed and scanned all media, Boost indicates that one drive was not accounted for. What is your next step?
Perform another internal and external sweep of the host
What does LRU stand for?
Lowest
Replaceable
Unit
Hearing protection rating must be:
NRR rating or international equivalent 22+
True or False: We can destroy Raspberry Pi
False
What triggers a "No Heartbeat" alarm?
Generated when the system does not receive 3 consecutive heartbeats from the RTD
True or False. Unplugging a single host will never trigger power-related alarms
False
What is Red Media?
All storage devices that have entered the Red Zone and have not been sanitized
Safety glasses/eye protection rating must be:
ANSI Z87+,EN 166, or local equivalent
What do you do when you logically destroy a drive(s) but not physically destroy it? (Machine failure)
Cut a state change TT
What is the interval that the RTD reports device status/health?
60 seconds
Where can the Host PSU be located?
Front of the rack/host, back of the rack/host
What system does Mobility use to check rack status?
InfraDB
Safety shoes rating must be:
ATSM F2413 or local equivalent