Measurements/math
Safety rules
Shop procedures
Tools identification
All relative
100

2 1/2 +2 1/2

5

100

Why should you need to keep your workplace clean

to prevent accidents

100

What machine do you use when cutting at a 0-degree angle?

milter saw

100
What is the difference between hand and powered tools

faster working

100

How much wood can wood a woodchuck chuck if a wood chuck could chuck enough wood 

at least 1 

200

What degree measurement is a milter cut.

45 degree

200

why is it important to were safety glasses.

To not get debris in your eyes

200

How many extinguishers do we have?

4

200

What do you use to mearsure.

tape measure

200

If a tree falls on the floor, did it really fall

yes it did fall.

300

If wood boards cost $5.50 each board and you need 13 boards what is the total cost.

$71.5

300

What should you do when you get injured in the shop

Tell teacher and get first aid.

300

What do you do when your machine has an electrical malfuction.

Unplugged tell teacher

300

What do you use to guide the wood in the table saw

push stick

300

What song came out October 7, 2013, by pitbull and Kesha

Timber 

400

34 3/4÷ 2

17 3/8

400

Why is it important to have a good ventillation.

So, they don't breathe sawdust

400

What should you do if a machine doesn't want to start

unplugged it and tell teacher

400

How do you stabilize you wood peace.

clamps

400

Who lives in the pineapple under the sea.

nobody

500

In a wood right triangle if the opposite side is 3 and the adjacent side is 4 what is the ratio of tanθ.

3/4

500

When using the lathe why is it important your work peace is center into the machine.

It doesn't go flying

500

What do you get when you go into the wood shop.

safety glasses

500

What do you use to put nails in wood

hammer or nail gun

500

What kind of wood was used for the plank under F1 cars?

Jabroc or beechwood 

M
e
n
u